Scheduling our work days properly helps us tremendously to be efficient throughout each day as we travel from job to job. A properly planned out work schedule will save us or waste us time, which could result in many reduced or wasted hours each week, each month, each year.
The basic premise of planning our lawn mowing work days is very straightforward, we assign mowing jobs in clusters that are close to each other for each work day, we drive to the furthest away suburb or job in our lawn mowing round early in the morning when there is least traffic and when we can be driving before we can legally start work at 7:00am, and then over the course of the day we slowly drive home again, so that the last job of the day is closest to home when we are tired and exhausted and when it's hot.
A long time ago, life for me as a lawn mowing contractor really was that easy.
Not anymore.
Everything has become more complicated as the decades rolled past, and so I and you must adapt. These days I deal with many more customers with locked gates or garage doors for access to their properties, who can’t give me a key because it’s the same key or code for their front door. Men and women of homes both work now, no one’s home to let us through the gate. Some customers need a specific day. Some customers need a specific time, which is usually early am before they go to work. The reality is that Australia has become a nation of extremely high crime rates, and everybody is locking up their homes and their families behind steel gates and spiked high fences, and this issue continues to deteriorate every year.
Last of all what has changed with the lawn mowing industry in Australia is the proliferation of lawn disease, which is everywhere now, and which must be accommodated to so that we as lawn mowing contractors are not spreading this disease to other customers lawns as we go about our work.
I can’t give you a perfect plan for your lawn mowing round, only you can do that, here I will discuss some of the variables which will alter how we plan out our work for each day.
Scheduling Our Lawn Mowing Work Days
Exactly as I stated at the beginning of this article, we should aim to follow that plan as much as we can, driving early in the morning to the furthest away areas in our lawn mowing round, and working our way home again, that’s always our ideal starting point and goal.
We should have our jobs scheduled close together to each other in each area we service, and a day of the week for each segmented section of our lawn mowing territory.
These are basic efficiency principles.
Early morning cuts will need to be accommodated, so ideally we would start at these jobs first in any one of our given territory sectioned areas, which is easy enough and allows us an early start and then early finish to our work days.
What we might find however is that that early morning cut would actually normally be a job done by us on our route home during the day, meaning it might be halfway to the furthermost part of our territory for that particular work day. In this case we would need to stop on our way to the furthermost part of our round to do this job first, and then drive to the outermost part of our territory to begin the rest of our work day. Which is fine, unless of course we might then be battling traffic chaos by that delay. If we left home that day at 6:30am to arrive at the first job at the furthermost part of our round for that day, then we might be clear all the way there, and we might never encounter any traffic at any time during our work day, but in this case, this delay might mean that we would then be driving through peak hour traffic to the outer part of our round, thus maybe adding another 30 minutes onto our work day.
We wouldn’t want that above scenario of course. Another option in this case might be to see if we can change the service day of this one early morning cut, then go off to a different area for the rest of the day, whereby we would avoid all traffic delays. It’s not ideal going out of our way like this, but at least we can still drive in the early morning, and still get to our next jobs relatively early too, and with minimal delays due to traffic. Of course we might ask, if it’s possible that we might have a key, providing the situation allows it, such as when the access through the garage to the backyard might also be access into their house.
I have one customer who needed the lawn mowing to be done on one of two days, however I was not working in that area on either of those days, and after consideration I did not want to change the rest of my service days around to accommodate just one customer. My solution to this problem was that the lawn was not really that far from my home, so I chose a service day when I had no other early morning cuts that I could do, I scheduled this customer on that day, and did his lawns first at 7:00am, and then drove straight to the other jobs in the other area to arrive just in time for starting time over there. Not ideal, but it did work out perfectly enough for me, and I still got to start another day at my preferred earlier starting time.
Quality of lawns is always another issue we have to consider when planning out our work days. Ideally we would want to do the best lawns first, and the worst lawns last. Once again for the most part, when time constraints are not upon us as a scheduling factor, this is a very easy consideration to take into account and plan for in our work days. Clean lawns first and weedy lawns last, as best as we can accommodate to this ideal within reason.
If we have a large lawn mowing territory that we service, then our set scheduled days for each area is very important to ensure that we can work efficiently. We may sometimes have an enquiry for a new lawn mowing job, and the potential customer would need us to mow on a certain day of the week, however for us we might be in an entirely different and faraway suburb from that new job. For us to leave our work area and to drive to the other job and back again might add an hour onto our day, which of course cannot be tolerated. We might consider doing that job in the early morning before we go to our main work area for the day, but again, this might add another 45 minutes to our day, which is still not acceptable. Going to that property on the way home from work might also add the same 45 minutes to our travel time for a single job, which we just cannot do. In this instance and with this job, it would be best to politely explain why we cannot do the work for them, and to wish them well.
Diseased Lawns - The Monster In Our Lawn Mowing Rounds
Lawn disease is at epidemic rates across Australia, and it has been this way for a very long time, at least 15 years or longer. The problem that I have seen over and over again over year after year, has seen Sir Walter lawns as being the source of this problem, whereby Sir Walter lawns are extremely highly susceptible to developing lawn disease all on its own, that this flaw is deeply ingrained in its genetic makeup, then because Sir Walter has become so popular over the years due to all of the advertising and marketing surrounding this grass, that lawn disease epidemic spreads from Sir Walter lawns to other neighbouring lawns too.
The lawn mowing contractor is also responsible for spreading lawn disease from diseased Sir Walter lawns onto other lawns, then those lawns become infected, and then those lawns can spread disease to other lawns.
The root cause of it all is Sir Walter.
We as professional lawn mowing contractor must be educated to this problem, to know that it originates with Sir Walter lawns, to be able to advise our customers to avoid this lawn variety at all costs, to advise customers that the problem with their Sir Walter Buffalo lawn is an inherent genetic flaw in this one variety of buffalo grass, and that they may likely never be able fully rid themselves of this lawn disease, ever.
It is also our responsibility as professionals to do everything to ensure that we are fully and properly educated to this epidemic, and to ensure we are doing everything possible that we are not spreading lawn disease around to different customers lawns in our lawn mowing rounds, which is exactly what we will do if we are ignorant of this epidemic, what is responsible for it, and how to deal with it.
I won’t go into all of those details here, other than what is pertinent to this discussion.
We need to ensure that to the best of our abilities that we are not using the same lawn mowing equipment that we used on a diseased lawn to then go and mow a clean lawn which is in good health.
This too will alter how we plan out our lawn mowing days.
We don’t want our first cut of the day to be a diseased Sir Walter lawn or other lawn, and then go and do all of the other mowing in our work day using the exact same lawn mowing equipment, as we would be solely responsible for spreading lawn disease onto our customers lawns.
There are a number of ways to deal with this problem of diseased lawns in our lawn mowing rounds, which I will discuss in another article. We must know though that we must deal with this gargantuan issue because Sir Walter lawns are everywhere !! The lawn disease epidemic will be with us in Australia for a very long time to come. We cannot avoid the problem, we must accommodate ourselves and adapt our work practices to ensure the best possible practices so that we are not making this a problem for all of our other customers whose lawns might be destroyed by this lawn disease epidemic if we are not diligent.

all articles and images are © copyright
thelawnmowingman.com
